Solar Power (PV) 6.655 kW System: Key Attributes

Key Features

Solar power panels need the sun’s light to generate electricity during the day, so it’s most economical to install a system that can supply your expected daytime electricity usage. Our smallest solar power system needs just 10 sqm of roof space to generate around 30% of the average Australian household’s energy use. The more power you would like to generate the bigger the roof space you will need.

Our new high-performance Solahart SunCell panel, is the ideal solution for Australian homes thanks to its innovative half-cell technology.  Read more here.

The GoodWe GW5000D-NS inverter is well suited for most small sized rooftop installations. This rugged outdoor inverter has been designed as a completely sealed unit to withstand the harshest environmental conditions.

Our extensive network of Solahart Experts are qualified to assess your home and provide you with the best systems to meet your family’s needs. Our installers are trained to the highest standards to ensure the safety and effectiveness of your system. All this is backed by our comprehensive warranties and the peace of mind you’ll get from dealing with Australia’s solar pioneer.

  •  Trouble Free - designed and engineered for Aussie conditions
  •  Independently rated as one of the highest performing panels.
  •  Transformerless Technology
  •  With connection for laptop or datalogger

^ Energy savings of up to 9100 kWh/year is based on the average amount energy produced per year by the PVV6555G50 solar power system in Zone 3. Savings and incentives will vary depending upon your location, type of Solahart system installed, orientation and inclination of the solar panels. 

† Solahart Warranty Details:

  • Solar Panels: 12 years, 
  • Inverter: 10 years
  • Racking and Balance of System components: 5 years,
  • Labour: 5 years,
  • For full warranty details refer to the Solahart Owner’s Guide.

PVV6555G50 Specifications


Solahart SunCell Solar Panel Specifications


Panel Electrical Characteristics
Maximum Power (Pmax)
Power Class
Open Circuit Voltage (Voc) 42.16V
Short Circuit Current  (Isc) 10.38A
Maximum Power Voltage (Vmp) 34.96V
Maximum Power Current (Imp) 9.87A
Module Efficiency (%) ≥20.3%
Temperature Coefficients  
-0.34%/ K
-0.27%/ K
+0.04%/ K
Maximum System Voltage  ( IEC ) 1000V


Panel Specifications 
Dimensions 1692 mm x 1002 mm x 35 mm
Weight 19.1 kg 
Cell Type and configuration 6 x 20 monocrystalline solar half-cells
Back sheet White
Frame Silver Anodised Aluminium
Temperature range -40°C to + 85°C
Junction Box Protection Class IP 67 with bypass diodes
Connectors Multi-contact MC4, IP68
Part Number Solahart345V1
Solahart Warranty 12 Years Product Warranty*



Solar Inverter Specifications

Technical data and types: GW5000D-NS
Input Side
Maximum DC Input Power 6500 W
Maximum Input Voltage 600 V
MPPT Range 80-550 V
Start-up Voltage 120 V
MPPT range for full load 250-550 V
Nominal DC Input Voltage 360 V
Maximum input current 11 A / 11 A
No. of MPP Trackers 2
No. of input strings per tracker 1
Output Side
AC Grid Connection Type Single phase
Nominal Output Power 5000 W
Maximum output apparent power 5000 W
AC output voltage (nominal) 220 / 230 V
Output power factor 50 / 60 Hz
Maximum output Current 22.8 A
Output THDi (@nominal output) < 3%
Maximum Efficiency 97.8%
Euro Efficiency 97.5%
Operating Performance
Anti-islanding protection


Input reverse polarity protection Integrated

Insulation resistor detection

Residual current monitoring kit Integrated
Output over current protection Integrated
Output short protection Integrated
Output over voltage protection Integrated
General Data
Operating temperature range -25~60 °C

Relative humidity

Operating altitude ≤ 4000 m
Cooling Natural Convection
Noise < 25dB
User interface LCD & LED
Communication RS485 or Wi-Fi (built in; antenna included)
Weight 13 kg
Size (W x H x D) 344 x 274.5 x 128 mm
Protection degree IP65
Night self-consumption <1W


Manufacturer's warranty 10 Years 1
Solahart Warranty 10 Years 2
Certifications and Standards
Grid Regulation EN50438(PL), VDE0126-1-1, AS4777.2, EN50438(PL), G83, ERDF-NOI-RES_13E, IEC61727, IEC62116,
CEI 0-21, RD 1699:2011 , UNE 206006 IN: 2011 , UNE 206007-1 IN: 2013

Safety Regulation IEC62109-1&2
EMC EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4-16, EN61000-4-18, EN61000-4-29


1. For full details see Manufacturer's warranty statement. 2. For full details see Solahart Owner’s Guide and Installation Instructions. Specifications and designs included in this datasheet are subject to change without notice.

How Solar Power (PV) Systems Work

Solar power panels generate electricity from sunlight. The roof mounted solar panels are made up of many photovoltaic (PV) cells. These cells collect the sun’s light and convert the energy into DC electricity. This is fed through an inverter and converted to 240V AC electricity to power your home.

The amount of electricity you can produce depends on the number and efficiency of the panels, the size of the inverter and the amount of sunlight in your location. Your home remains connected to the electricity grid so when you generate more electricity than you need you can feed it into the grid or purchase more from the grid when you are not producing enough to meet your requirements.

The Science Explained

The amount of energy from the sun that falls on Earth's surface is enormous. All the energy stored in Earth's reserves of coal, oil, and natural gas is matched by the energy from just 20 days of sunshine. Outside Earth's atmosphere, the sun's energy contains about 1,300 watts per square meter. About one-third of this light is reflected back into space, and some is absorbed by the atmosphere (in part causing winds to blow).

By the time it reaches Earth's surface, the energy in sunlight has fallen to about 1,000 watts per square meter at noon on a cloudless day. Averaged over the entire surface of the planet, 24 hours per day for a year, each square meter collects the approximate energy equivalent of almost a barrel of oil, or 4.2 kilowatt-hours of energy every day. Deserts, with very dry air and little cloud cover, receive the most sun—more than six kilowatt-hours per day per square meter

How does a solar cell turn sunlight into electricity?

The sun's light (and all light) contains energy. Usually, when light hits an object the energy turns into heat, like the warmth you feel while sitting in the sun. But when light hits certain materials the energy turns into an electrical current instead, which we can then harness for power. Solar technology uses large crystals made out of silicon, which produces an electrical current when struck by light. Silicon can do this because the electrons in the crystal get up and move when exposed to light instead of just vibrating in place to make heat. The silicon turns a good portion of light energy into electricity.

The most important components of a PV cell are two layers of semiconductor material generally composed of silicon crystals. On its own, crystallized silicon is not a very good conductor of electricity, but when impurities are intentionally added—a process called doping—the stage is set for creating an electric current. The bottom layer of the PV cell is usually doped with boron, which bonds with the silicon to facilitate a positive charge (P). The top layer is doped with phosphorus, which bonds with the silicon to facilitate a negative charge (N).

When sunlight enters the cell, its energy knocks electrons loose in both layers. Because of the opposite charges of the layers, the electrons want to flow from the n-type layer to the p-type layer, but the electric field at the P-N junction prevents this from happening. The presence of an external circuit, however, provides the necessary path for electrons in the n-type layer to travel to the p-type layer. Extremely thin wires running along the top of the n-type layer provide this external circuit, and the electrons flowing through this circuit provide the cell's owner with a supply of electricity.

How PV Cells Work

Most PV systems consist of individual square cells averaging about six inches on a side. Alone, each cell generates very little power (approximately four watts), so they are assembled together panels encased in glass and plastic to provide protection from the weather. These panels are either used as separate units or grouped into even larger arrays to form a solar power (PV) system.

Solar Power System Design

The Solahart Solar Power system is comprised of two main components; a string or array of photovoltaic panels and an inverter. The photovoltaic (PV) panels transform solar radiation into electrical energy in the form of direct current (DC). In order to utilise this energy and feed it back into the grid, the direct current is transformed into alternating current (AC) by the inverter. This conversion is also known as DC to AC inversion.

The alternating current generated by the inverter is fed into the main switchboard, which in turn is connected to the electricity grid. If the energy generated exceeds that required by property demands, your electrical network operator may allow the difference to be directly injected into the grid and become available to other users. Energy injected into the grid can be measured by electricity network operators as either gross (everything generated) or nett (excess generated). Injected energy may or may not be purchased by the local electrical network operator according to national and local standards, and regulations.

Solahart Canberra Alt Tag

PV Panel Orientation & Inclination

To maximize system output, install panels at optimum orientation and inclination (tilt) angles. The specifics of this will depend on the installation location and must be calculated by a qualified system designer. The ideal angle for mounting a panel should result in the sun’s rays falling perpendicular (i.e. at a 90° angle) to the panel surface.

Panels should be installed in a shade free position. Even minor or partial shading of the panels/array will reduce system output. A panel is considered shade free when it is both:

  • Free from shade or shadows all year round.
  • Exposed to several hours of direct sunlight, even during the shortest days


Solahart SunCell Solar Panel (345W): Download

Solahart Solar Power (PV) GW5000D-NS Inverter: Download

Installation Manuals

Solahart345V1 Panel's Installation Instructions: Download

Solar Incentive Forms

Small-scale Technology Certificate Assignment Form: Download


Solahart Warranty: Download